High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is a challenging issue for owners. From the desired temperature to their favorite light level, guests are more likely to return for an additional stay when they can customize their room to suit their preferences. However, providing these functions using old technology wastes a lot of energy. For instance, there are a lot of difficulties with the old card key switches. Guests can put any card within the old switches, or they might ask for more than one card. Even when hotel desk refuses to offer more than one card to a guest, she/he might claim to have lost the credit card.
The conventional old technology of hotel card switch. There is also a large amount of over usage of lights and AC energy as a result of things running even though guests aren’t in their rooms, and this could cause a monetary loss for the owner. Obviously, no hotel owner wants to prohibit guests from having a comfortable stay, nor do owners expect guests to enter a dark or cold hotel room. Nobody is to blame. Both guests and hotel owners have the right to fulfill their interests.
Some hotel owners think if they separate the AC from the main network, less energy will likely be consumed, while some think that motion sensors are the solution. However, these approaches fail to resolve the issue. The AC is easily the most energy-consuming device of all the, and motion sensors could be nightmares because they only function according to movement detection, meaning that the AC and lights might go off while a guest is sleeping or reading a magazine. Nightmarish!
The TIS Automation Company offers the best answer for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with being able to detect human presence in a room. This ceiling-mounted sensor has many options, such as a PIR motion sensor, an easy harvest sensor, 2X digital inputs, infrared emitters appropriate for all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.
TIS Energy servant, the brand new method for hotel energy saving technology. By installing this door sensor in the entrance to a room, connecting it towards the Energy Servant’s digital input, and programming the logic lines, the situation of room occupancy is entirely resolved.
These logics can be defined for this particular sensor to handle room energy with no discomfort for guests:
Logic 1: When there is any movement inside the room, the occupancy mode is going to be on.
Logic 2: When the main door is opened and closed, a flag will switch on for starters minute to check if there is certainly movement in room. If no movement is detected after one minute, the system will activate energy-saving mode. This is valuable in situations each time a guest enters the room briefly. In energy-saving mode all lighting is off aside from a nightlight, which stays on for 3 hours in case there exists another guest having a nap. Also, the AC is definitely not turned off, nonetheless its temperature will likely be decreased by 2 degrees. This helps save energy with time.
Logic 3: In the event the energy-saving mode is enabled without any movement is detected for more than 3-5 hours, the nightlight and AC will be switched off automatically. It is also easy to define lower temperature levels for the AC. Additionally, the Energy Servant can make the AC on/off when it recognizes that a balcony window/door is open. All this requires is adding a magnetic contact connected to the balcony window/door and programming the desired smart decision. The sunshine harvest sensor helps save energy by wscgid balcony lights off if you have enough sun light.
Another practical and beneficial capacity for this sensor is its built-in thermostat, which will help keep up with the right temperature all the time. This is important for keeping furniture fresh and intact. Also, in hot spots and even if the room is empty for a long time, humidity and bad smells will not become a problem within the room. This sensor may be programmed to alter AC to dry mode in the event the room temperature reaches or exceeds 28-30C degree. This can happen repeatedly in the daytime if necessary. A comparable performance can be programmed in cold spots to prevent mold.
Another choice with this smart device is TV control. If the hotel offers the guest having a room tablet, she/he will be able to control the room’s TV with it. This sensor was placed in 20 rooms within the Fairmount Blue Mountain Hotel in Sydney. The result was considerably enhanced energy management and several satisfactory comments from guests who enjoyed their luxurious stay at this hotel.
TIS offers the ability to meet both hotel owners and guests interests and requires with just a couple items and then in by far the most energy-efficient way possible. For more information or even to schedule a consultation, give us a call at www.tiscontrol.com